HP-UX Overview and Command Summary - page 11

Starting an X-Window application from telnet

start an X-Window server on the PC, such as exceed
export DISPLAY=W.X.Y.Z:0.0     <---W.X.Y.Z is the IP Address of the PC
/opt/ignite/bin/ignite                          <---Now just run the program


Configuring an HP 700/96 Terminal for a server connection:

• Terminal Ports
• Port 1 
• Datacommunications
• 25 Pin - use this to connect to the N class server with a 25 pin to 9 pin cable
• Port 2 - used to connect to an external peripheral
• Parallel
• 25 Pin
• Port 3
• Datacommunications
• 9 Pin - use this port to connect to the A class server with a 9 pin to 25 pin cable
• Terminal Configuration Settings
• Press User/System function key
• modes
• Remote Mode must have an asterisk in it's box (indicating it is selected)
• config keys
• datacomm config
• baud rate 9600
• parity:  none/8
• xon/xoff
• terminal config
• serial (2)/parallel(1) - 25 pin console port
• serial (1)/parallel(1) - 9 pin console port
• Term ID - vt100
• Term Mode - em100
• ansi config
• em100
• backspace/del

Page 12
Page 10

Find HP-UX Overview and Command Summary All pages 

Page 12    |||    Page 11    |||   Page 10   |||   Page 9   |||

Page 8      |||    Page 7      |||   Page 6     |||   Page 5   |||

Page 4      |||    Page 3      |||   Page 2     |||    Page 1  |||

Share this

ChinniLax