Tuesday, May 14, 2024

Cohesity Installation Professional Practice Exam - 10 Questions and Answers

Get latest Cohesity Data Protection Associate Exam Exam Questions and Practice Test with new updates ... test questions, practice tests and exam prep material.

By diligently preparing with this exam, you will be better equipped to excel in your career and confidently demonstrate your expertise to employers and clients.

 

These are just practice test exam questions of “Cohesity Installation Professional Practice Exam” before you book your slot for main exam.

 

  1. Which unique identifier is used to associate a cluster with a customer in Cohesity Helios?

chassis serial numbers

cluster ID

cluster setup serial number

cluster name

 

 

  1. Your customer has run an ~ifconfig~ command on one node and discovers that the node's IP address is listening on interface ~br0~. When using the cluster UI and ~iris_cli~ commands, they only see references to ~intf_group1~ and ~bond0~.

 

In this scenario, what are two reasons for this outcome? (Choose two.)

 

Each bridge interface is mapped to a bond interface.

The bridge interface ~br0~ is the same thing as ~intf_group1~.

The ~br0~ interface is only created once the VLANs are added.

The bridge interfaces are hidden.

 

 

  1. While preparing a new cluster installation, you have manually configured the networking options on each of the four free nodes to support a non-native VLAN. When the initial cluster setup is launched, only a single node is discovered. 

In this scenario, what caused the problem?

  

The VIPs have not been allocated on the non-native VLAN.

The Avahi service is not listening on the non-native VLAN interface.

A static route has not been defined for the non-native VLAN.

The DNS server is not reachable.

 

 

  1. After creating your Cohesity cluster, you attempt to claim it on behalf of your customer in the support portal. You need the cluster incarnation ID and the cluster ID to accomplish this task.

 

In this scenario, which command would you run to obtain this information?


~iris_cli chassis list~

~iris_cli cluster ls-pkgs~

~iris_cli sysctl list~

~iris_cli cluster status~

 

  1. Which two node types would exist in a single node cluster? (Choose two.)

 

Pure FlashRecover

Cisco UCS C220 M5 All Flash

Virtual Edition for Hyper-V

Cloud Edition for AWS

 

 

  1. During initial cluster setup, you are asked for multiple parameters to create the cluster.

 

In this scenario, which two parameters are required? (Choose two.)

 

 

Cluster Domain Name

cluster VIPs

NTP server

IPMI username

 

 

  1. You are deploying a 3-node Cohesity cluster at a customer's site. The customer wants to use EC2:1 with a fault tolerance setting of 1D:1N.

 

If a node goes down, which two statements would be true? (Choose two.)

 

The cluster will automatically switch to RF2 to maintain redundancy.

The cluster will automatically switch to RF1 since no redundancy is possible.

The cluster automatically returns to EC2:1 when the node is replaced.

The cluster fault tolerance will need to be manually updated when the node is replaced.

 

 

  1. You want to register a Cohesity cluster running software version 6.5.1 to the Cohesity Helios Management SaaS.

 

In this scenario, what are two prerequisites before completing this task? (Choose two.)

 

You must execute the Cohesity Helios script.

You must create a local user for Helios.

You must open outgoing port TCP 443.

You must create the Cohesity Support Portal credentials

 

 

  1. You are asked to install a Cohesity cluster using Cisco UCS C220 M5 nodes.

 

In this scenario, what is the appropriate IP address that you should use to launch the KVM and install the Cohesity ISO?

 

CIMC IP address

iLO IP address

Node IP address

iDRAC IP address

 

 

  1. Your customer is asking about the ability to put Cohesity software on some older Cisco UCS hardware that they want to use to expand storage capacity.

 

In this scenario, which two statements are correct? (Choose two.)

 

Cohesity supports mixed Cisco and Cohesity hardware.

Cohesity storage nodes can support any hardware configuration.

Cohesity storage nodes support UCS B-Series blades.

Cohesity supports Cisco select models.

 


Tuesday, August 1, 2023

VMCE practice exam – Veeam Certified Engineer 2023

VMCE practice exam – Veeam Certified Engineer




I often get the question, how do I pass the VMCE exam? Well, one very important aspect is to leverage a VMCE practice exam, however, that should never be your only study material. In this post, I will do my best to provide up-to-date and valuable study materials


This test is reasonable for anybody responsible for configuring, overseeing, or supporting a Veeam Availability Suite v10 climate


1.) Which prerequisites should be met to perform exchange log reinforcements for an information base on a Microsoft SQL Server with Veeam Backup and Replication?

(Pick the 2 fitting choices)

A. The recovery model for the information base should be set to Simple.

B. The recovery model for the information base should be set to Full or Bulk-Logged.

C. No other reinforcement instrument shortens the SQL server’s log records.

D. The data set should have its log flies on a different VMDK.


Right Answer: BC


2.) What is the adjustment point in a SureBackup work?

A. At the point when all recuperation check tests can be begun

B. At the point when the reinforcement document is effectively checked

C. At the point when the virtual machine begins booting

D. At the point when all recuperation confirmation tests are passed


Right Answer: A


3.) Which of the accompanying implicit predefined tests can be performed to confirm a VM reproduction began in a Virtual Lab? (Pick the 3 fitting choices)

A. Application test

B. Heartbeat test

C. Memory test

D. Hard drive test

E. CRC check

F. Ping test


Right Answer: ABF


4.) Which EMC SAN storage systems are viable with the Backup from SAN Snapshot highlight in Veeam Backup and Replication? (pick the 2 suitable choices)

A. EMC VNXe

B. EMC ISILON

C. EMC VNX

D. EMC Data Domain


Right Answer: AC


5.) Which system is a choice to finish imitation failback?

A. Fast Migration

B. Imitation failback needn’t bother with to be concluded.

C. Commit Failback

D. VMware Storage vMotion

E. Relocate to creation


Right Answer: C


6.) When is the full reinforcement made in a reinforcement duplicate occupation for each GFS maintenance point?

A. Never. Reinforcement duplicate positions don’t utilize full reinforcements.

B. After the straightforward maintenance strategy is met and the .vbk has been refreshed to the booked date

C. On the day that the full reinforcement is booked

D. Each GFS point is made when a functioning full is run on the reinforcement.


Right Answer: C


7.) When should SQL Server Standard (or higher) be conveyed for the example utilized by Veeam Backup and Replication rather than the SQL Server Express case introduced naturally?

A. Veeam Backup Administrator decides to keep the data set remote

B. Undertaking Plus variant is utilized

C. Veeam Backup Enterprise Manager is introduced

D. For the enormous scope of conditions


Right Answer: D


8.) A Backup Administrator needs to do offsite reinforcement work. A Windows-based server is utilized as a storehouse. Which arrangement of the Veeam Data Mover Service(s) would bring about the ideal design?

A. One – at the remote objective site

B. One – at the creation site

C. Something like two – one at the creation site and one at the remote site

D. Veeam Data Mover administrations are not expected to move information offsite


Right Answer: C


9.) Which reinforcement technique is portrayed underneath? “After a full VM reinforcement is made, ensuing reinforcements are gradual. Just information hinders that have changed since the last work run is upheld. Every one of the progressions is infused into the made .vbk record to reconstruct it to the latest condition of a VM.”

A. Always forward gradual reinforcement

B. Turn around gradual reinforcement

C. Forward gradual reinforcement with engineered fulls with change to rollbacks

D. Forward gradual reinforcement


Right Answer: BC


10.) During the SureBackup work execution, re-try logs are made for each confirmed VM. Where are the re-try logs for the gig found?

A. In a unique organizer of the Backup and Replication server

B. In the reinforcement document itself

C. On the datastore determined in SureBackup work settings

D. On the reinforcement storehouse

E. On the datastore determined in Virtual Lab settings


Right Answer: D


11.) Outrageous pressure delivers the littlest reinforcement record, however, it might likewise lessen:

A. Reinforcement execution

B. Time expected to play out a reinforcement

C. Blocks of free space

D. Indistinguishable blocks of information


Right Answer: A


12.) Which versions of Veeam Backup and Replication incorporate Backup from Storage Snapshots?

A. All Enterprise Plus Editions

B. Undertaking Plus Edition for Hyper-V as it were

C. Standard, Enterprise and Enterprise Plus Edition for Hyper-V

D. Standard, Enterprise and Enterprise Plus Edition for VMware

E. Endeavor Plus Edition for VMware as it were


Right Answer: E


13.) From inside which of the accompanying programming items can the Veeam Backup and Replication Infrastructure be remotely observed when modules/additional items are introduced? (pick the 2 suitable choices)

A. Continuum

B. GFI MAX

C. Kaseya

D. LabTech

E. N-Able


Right Answer: CD


14.) Which work insights list can be utilized to distinguish the slowest part of the information way of a reinforcement work?

A. Warnings

B. “Action”log

C. Processing rate

D. Bottleneck insights


Right Answer: D


15.) Which of the accompanying targets is accomplished by adding extra intermediary servers, related to resemble handling? (pick the 2 proper choices)

A. Keeping away from formation of VMware snapshots.

B. Dispersing reinforcement handling across different intermediary servers

C. Diminishing reinforcement span

D. Setting the I/O dormancy limit for creation stockpiles

E. Diminishing reinforcement size


Right Answer: BD


16.) Which occasions in Veeam Backup and Replication can be designed for programmed email or general UI notices? (pick the 4 suitable choices)

A. Low circle space at the vault

B. Veeam support contract lapse

C. Such a large number of previews on the VM

D. Another Veeam Backup and Replication fix

E. Fundamental updates for the Microsoft Hyper-V has and off-have reinforcement intermediaries

F. Important updates for the VMware vSphere hosts and reinforcement intermediaries


Right Answer: ABEF


17.) Which of the accompanying assertions about the Guest Integration Proxy part is valid?

A. Conveys a Veeam industrious specialist on each window virtual machine to be handled

B. Conveys a transitory runtime coordination process on each Linux virtual machine to be handled with Enterprise release or higher

C. Mounts the virtual machine document framework for the purpose of perusing while playing out a reestablish to remote site

D. Conveys a brief runtime coordination process on each window virtual machine to be handled with Enterprise release or higher

E. Conveys an impermanent runtime coordination process on each virtual machine to be handled


Right Answer: E


18.) Which of the accompanying Veeam items can appraise the necessary free space required on track reinforcement stores?

A. Veeam ONE

B. Veeam Backup Enterprise Manager

C. Veeam Backup and Replication

D. Veeam module for vSphere Web Client


Right Answer: D


19.) Is it conceivable to switch between reinforcement modes while making customary reinforcement records?

A. Indeed, the new mode will change all current reinforcements in a fitting manner and keep making reinforcements in a similar reinforcement storehouse.

B. Indeed, for this situation you should indicate another reinforcement storehouse.

C. Indeed, the new mode leaves existing reinforcements as they are and keeps making reinforcements in a similar reinforcement vault.

D. No, to make reinforcements utilizing another mode, you need to make another reinforcement work.


Right Answer: C


20.) Which of the following is the capability of the visitor coordination intermediary part?

A. Sends a Veeam determined specialist on each window VM to be handled

B. Mounts the VM record framework for perusing while playing out a reestablish to the remote site

C. Conveys a brief runtime coordination process on each window VM to be handled

D. Processes VM information, taking the heap off the Veeam reinforcement server


Right Answer: C










Most Asked Veeam Backup Interview Questions and Answers 2023

 

Veeam is a software company that provides data backup, disaster recovery and virtualization management solutions. Veeam’s products are used by organizations of all sizes, from small businesses to Fortune 500 companies. If you are interviewing for a position at Veeam, you can expect to be asked questions about your experience with data backup, disaster recovery and virtualization. In this article, we review the most common Veeam interview questions and provide tips on how to answer them.


Veeam Interview Questions and Answers

Here are 20 commonly asked Veeam interview questions and answers to prepare you for your interview:


1. What are the Veeam Backup Components?

The Veeam backup components are the Veeam Backup & Replication server, the Veeam Backup & Replication console, and the Veeam Backup & Replication repository.


2. Can you explain what a backup repository is in context of Veeam?

A backup repository is a location where backup files and VM copies are stored. A repository can be a local folder, an SMB share, an FTP server, or a cloud storage provider.


3. How does Veeam perform backups for virtual machines?

Veeam uses a proprietary technology called changed block tracking (CBT) to track which blocks of data have changed in a virtual machine since the last backup. This allows Veeam to only back up the changed data, which reduces the amount of time and storage space required for backups.


4. How can you verify whether or not a VM backup was successful using Veeam?

You can verify whether or not a VM backup was successful using Veeam by looking at the Backup Job Summary. This will give you a detailed overview of the backup job, including any errors that may have occurred.


5. Can you use Veeam to back up physical servers? If yes, then how?

Yes, Veeam can be used to back up physical servers. This can be done by using the Veeam Agent for Windows or the Veeam Agent for Linux.


6. Can you use Veeam to back up Linux-based virtual machines? If yes, then how?

Yes, Veeam can be used to back up Linux-based virtual machines. In order to do this, you will need to install the Veeam Agent for Linux on the virtual machine that you wish to back up. Once the agent is installed, you will be able to use Veeam Backup & Replication to create and manage backups of your Linux VM just like you would with any other type of VM.


7. In which scenario would you need to deploy an additional proxy server?

An additional proxy server may be needed in a scenario where there is a lot of data to be backed up, and the existing proxy server is struggling to keep up with the demand. By adding an additional proxy server, you can distribute the load and help improve performance.


8. What are some examples of scenarios where Veeam replication might be useful?

Veeam replication can be useful in a number of scenarios, such as when you need to provide a failover solution in case of a primary site outage, or when you need to create a copy of your data in a secondary location for disaster recovery purposes.


9. Is it possible to restore individual files/folders from a Veeam backup file? If yes, then how?

Yes, it is possible to restore individual files/folders from a Veeam backup file. To do this, you will need to use the Veeam Restore Console. This can be done by opening the backup file in the console and then selecting the files/folders that you want to restore.


10. Can you recover an entire VM from a Veeam backup file? If yes, then how?

Yes, you can recover an entire VM from a Veeam backup file. To do this, you will need to use the Veeam Restore Wizard. This wizard will guide you through the process of selecting the backup file that you want to use, as well as the location where you want to restore the VM.


11. Can you use Veeam to back up VMware ESXi hosts? If yes, then how?

Yes, Veeam can be used to back up VMware ESXi hosts. You can do this by creating a backup job in Veeam and selecting the ESXi hosts that you want to include in the job. Veeam will then take care of backing up the selected ESXi hosts.


12. What do you understand about the “Veeam Explorer” feature?

Veeam Explorer is a feature that allows you to quickly and easily restore individual files, applications, and even entire VMs from your backups. This can be a lifesaver if you have accidentally deleted something or if you need to roll back to a previous version of a file or application.


13. What’s the difference between forward and reverse incremental backup methods? Which one is better?

Forward incremental backup is the most common type of incremental backup, and it simply backs up changed blocks since the last full or incremental backup. Reverse incremental backup, on the other hand, first backs up all changed blocks since the last full backup, and then only backs up changed blocks since the last reverse incremental backup.


Reverse incremental backup is generally considered to be better than forward incremental backup, as it results in fewer full backups and thus less storage space required.


14. How can you enable encryption on a Veeam backup file?

You can enable encryption on a Veeam backup file by opening the backup file in Veeam Backup & Replication, selecting the Backup File Properties option from the File menu, and then selecting the Enable Encryption option.


15. Is it possible to automate Veeam backup jobs? If yes, then how?

Yes, it is possible to automate Veeam backup jobs using PowerShell scripts. You can use PowerShell to create a new backup job and configure it to run on a schedule. You can also use PowerShell to add new servers to an existing backup job or to modify the settings of an existing backup job.


16. What is the best way to store Veeam backups offsite?

The best way to store Veeam backups offsite is to use a cloud-based storage solution. This will ensure that your backups are always available and can be quickly restored in the event of a disaster.


17. Is there any limit as to how many backup proxies can be enabled for a single backup job?

No, there is no limit as to how many backup proxies can be enabled for a single backup job.


18. Is it possible to configure different retention policies for different backup jobs? If yes, then how?

Yes, it is possible to configure different retention policies for different backup jobs. You can do this by going into the Backup Job Properties and selecting the Retention Policy tab. From here, you can select the desired retention policy for the job.


19. Can you use Veeam to create image-level backups? If yes, then how?

Yes, Veeam can create image-level backups. To do this, you will need to use the Veeam Agent for Windows or the Veeam Agent for Linux. With either of these agents, you can create a full backup of your system, which will capture the entire system image.


20. What is the purpose of a backup catalog?

A backup catalog is a file that contains information about all of the backups that have been created with Veeam. This file is used by Veeam to restore backups, and it can also be used by third-party software to access Veeam backups.





Sunday, July 30, 2023

Coin Master Daily Spin and Coin Links - Free Spin link for Coin Master

  Hi Guys,

Its not relevant to our moto of Technical Help, but its just a topic where it used by me regular. So I just want to add this in to my website as a separate post. SO i can invite more viewers. Thanks for Understanding.



Tags: Free SPin, Spin Link, Coin master, Coin master free spin links, CM Link, CM Speeder, Coin master hacks, coin master mod menu, Coin master clone, clone cards, clone software, mode menu, coin master spins, free spin, haktuts spin, Haktuts, speeder link, speeder links, new speeder, speeder version, speeder 210, coin master speeder 210, cm speeder.


Thursday, December 24, 2020

AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 - Part 5 | Microsoft Azure Fundamentals (AZ-900)

     AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 | Microsoft Azure Fundamentals (AZ-900)

Collect Microsoft AZ-900 Exam Dumps for candidates. 100% Free

Microsoft Azure Fundamentals AZ-900 - Dumps - Practice Exam with Question & Aanswers

New Microsoft Azure Fundamentals AZ-900 exam dumps have been cracked, which are valuable for you to clear the test. 

Follow all the Questions and Practice before you book a slot and attend the Exam. 

AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 - Part 4 | Microsoft Azure Fundamentals (AZ-900)

    AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 | Microsoft Azure Fundamentals (AZ-900)

Collect Microsoft AZ-900 Exam Dumps for candidates. 100% Free

Microsoft Azure Fundamentals AZ-900 - Dumps - Practice Exam with Question & Aanswers

New Microsoft Azure Fundamentals AZ-900 exam dumps have been cracked, which are valuable for you to clear the test. 

Follow all the Questions and Practice before you book a slot and attend the Exam. 

AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 - Part 3 | Microsoft Azure Fundamentals (AZ-900)

   AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 | Microsoft Azure Fundamentals (AZ-900)

Collect Microsoft AZ-900 Exam Dumps for candidates. 100% Free

Microsoft Azure Fundamentals AZ-900 - Dumps - Practice Exam with Question & Aanswers

New Microsoft Azure Fundamentals AZ-900 exam dumps have been cracked, which are valuable for you to clear the test. 

Follow all the Questions and Practice before you book a slot and attend the Exam. 

AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 - Part 2 | Microsoft Azure Fundamentals (AZ-900)

  AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 | Microsoft Azure Fundamentals (AZ-900)

Collect Microsoft AZ-900 Exam Dumps for candidates. 100% Free

Microsoft Azure Fundamentals AZ-900 - Dumps - Practice Exam with Question & Aanswers

New Microsoft Azure Fundamentals AZ-900 exam dumps have been cracked, which are valuable for you to clear the test. 

Follow all the Questions and Practice before you book a slot and attend the Exam. 

AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 - Part 1 | Microsoft Azure Fundamentals (AZ-900)

 AZ-900 Dumps - Actual exam question and Answers from Microsoft's AZ-900 | Microsoft Azure Fundamentals (AZ-900)

Collect Microsoft AZ-900 Exam Dumps for candidates. 100% Free

Microsoft Azure Fundamentals AZ-900 - Dumps - Practice Exam with Question & Aanswers

New Microsoft Azure Fundamentals AZ-900 exam dumps have been cracked, which are valuable for you to clear the test. 

Follow all the Questions and Practice before you book a slot and attend the Exam. 

Wednesday, December 9, 2020

SAN REAL TIME Interview Questions and Answers - Best described - Part 2

 REAL TIME SAN Interview Questions and Answers -

We have shared before some realtime SAN Interview Questions and we got good response from members. We would like to share some more which collected from realtime scenarios and hope these helps you to crack SAN interview easily.

Find other Related topic from: 

SAN REAL TIME Interview Questions and Answers - Best described - Part 1

All the best dears...   

[Updated] Best Amazon Interview questions with explained - 60 Question and Answers

 [Updated] Best Amazon Interview questions with explained - 60 Question and Answers

If you are interested in a career in the cloud industry, your chance has arrived. With cloud computing platforms like AWS taking the present business scenarios by storm, getting trained and certified in that particular platform can provide you with excellent career prospects. Bear in mind that AWS training and certification will only provide you with knowledge unique to that platform, although there may be ideas and principles that could carry over into other cloud providers.

1. Define and explain the three basic types of cloud services and the AWS products that are built based on them?

The three basic types of cloud services are:

Thursday, December 3, 2020

MicroFocus Data Proetctor (HPDP) DP 10 Upgrade - Upgrade prerequisites

MicroFocus Data Proetctor (HPDP) DP 10 Upgrade - Upgrade prerequisites 

Before upgrading an existing product version, consider the following:

  • Ensure that the following ports are open for Inet:

    • Fresh Data Protector installation - 5565

    • Upgraded Data Protector installation - 5555

  • Disable encrypted control communication (ECC) on all clients and the Cell Manager if you are upgrading from Data Protector 9.x and earlier.
  • For information about supported and discontinued platforms and versions, see the latest Support Matrix.

MicroFocus Data Protector (HPDP) - Most asked interview questions

 

 
MicroFocus Data Protector  (HPDP) - Most asked interview questions

MicroFocus Data Protector  (HPDP) - Most asked interview questions


Hi Friends, hope you are enjoying with my other posts that I shared sofar. Here again I come up with new post where you can understand and pickup your self for attending an Interview and crack it easily. Hope this helps to find wat Interviewer askes you in the HP Data Projector Interview.

Here are most Asked Interview Questions for HP Data Proetector. I will try to update the answers soon for the below list. Book mark and come back if you need answers for the same. All the best.

Wednesday, August 28, 2019

NetBackup interview Questions and Answers - Top Rated list

#NetBackup interview Questions and Answers. I just described the answers as per my knowledge in a short term, if you need more details information you can go with Veritas.com for FAQ or help documents. You can find more detailed.


1. What is User Backup,User Archive & How to take?
Ans: User initiated backup from Backup Archive and restore window of the client interface. it backs up all the files that user specifies.
User Archive : user will take a backup , once backup is successful then the data from clients disk will be deleted and freed.


EMC Networker Interview Questions - Top Listed Networker FAQ

Here I'm sharing frequently asked most top rated Interview Questions for EMC Networker Interview. I will share the Answer sheet soon when I get time, come back to this page again for answers.

Subscribe with your mail to get notification when ever BURTools added new posts.Hope it will help to learn new skills. All the best.

Wednesday, June 5, 2019

Netbackup Cheat Sheet

Master Server Daemons/Processes

Request daemonbprd
Schedulerbpsched (started with bprd)
Netbackup database managerbpdbm (started with bpsched)
Job Monitorbpjobd (started with bpdbm)
Media Server Daemons/Processes

Communications daemonbpcd
Backup and restore managerbpbrm (started with bpcd)
Tape Managerbptm (started with bpbrm)
Disk Managerbpdm (started with bpbrm)
Media Managerltid
Bar code readeravrd (started with ltid)
Remote device management/ controls volume databasevmd (started with ltid)
Roboticdaemon (one on each media server) talks to tldcdtldd (started with ltid)
Robotic control daemon talks to the robot directl via scsitldcd (started with ltid)
Catalogs

Master Server
Information about backed-up filesimage - /opt/openv/netbackup/db
Storage Unit, Global Configuration, Catalog backup configuration.config - /opt/openv/netbackup/db
Backup Policy informationclass - /opt/openv/netbackup/db
Job status informationjobs - /opt/openv/netbackup/db
Netbackup logs with error and status informationerror - /opt/openv/netbackup/db
Information on volumes, volume pools, scratch pool and volume groupsvolume - /opt/openv/volmgr/database
Media Server
Tracks assigned volumes (media that has data them)media - /opt/openv/netbackup/db
Information about devices managed by the media serverdevice - /opt/openv/volmgr/database
Log and Information Files

Netbackup and Patch versions/opt/openv/netbackup/bin/version
Media Version/opt/openv/volmgr/version
Patch Level history/opt/openv/netbackup/patch/patch.history
Buffer size/opt/openv/netbackup/db/config/SIZE_DATA_BUFFERS
Number of buffers/opt/openv/netbackup/db/config/NUMBER_DATA_BUFFERS
Network Buffer Size/opt/openv/netbackup/NET_BUFFER_SZ (default = 32)
Java GUI authorisation/opt/openv/java/auth.conf
Catalog type (binary or ASCII)/opt/openv/netbackup/db/config/cat_format.cfg
Netbackup and media manager parameter files/opt/openv/netbackup/bp.conf
/opt/openv/volmgr/vm.conf
Corrupt Database image files (5.0 and above)/opt/openv/netbackup/db.corrupt
Server Commands

Check license details/opt/openv/netbackup/bin/admincmd/get_license_key
Start Netbackup
netbackup start

/opt/openv/netbackup/bin/initbprd (master)
/opt/openv/volmgr/bin/vmd (media)
Stop Netbackup (does not disconnect GUI sessions)
netbackup stop
/opt/openv/netbackup/bin/admincmd/bprdreq -terminate (master)
/opt/openv/netbackup/bin/bpdbm -terminate (master)
Stop Netbackup and kill all GUI sessions/opt/openv/netbackup/bin/goodies/bp.kill_all
Start the GUI/opt/openv/netbackup/bin/jnbSA
Scan for tape devicessgscan (solaris)
ioscan (HPUX)
Display all Netbackup processesbpps -a
lists servers errors
bperror -U -problems -hoursago
bperror -U -backstat -by_statcode -hoursago
display information on a error codebperror -statuscode [-recommendation]
Reread bp.conf file without stopping Netbackupbprdreq -rereadconfig
Check database consistency
bpdbm -consistency 1
bpdbm -consistency 2
Check for the below lines:
Bad image header
Does not exist
Netbackup Recovery
Device catalog is intactbprecover -l -m -d dlt (listing)
bprecover -r -m -d dlt (recovering)
Device catalog is gone or corruptedbprecover -l -tpath (listing)
bprecover -r -tpath (recovering)
Disk backupsbprecover -l -dpath (listing)
bprecover -r -dpath (recovering)
Volume Commands

Tape Drive and Inventory Commands
List drive status, detail drive info and pending requestsvmoprcmd
List the tape drive statusvmoprcmd -d ds
List the pending requestsvmoprcmd -d pr
Control a tape devicevmoprcmd [-reset][-up][-down]
List all changes in the robot(but do not update)
vmupdate -recommend -rt tld -rn 0
vmcheckxxx -rt tld -rn 0 -recommend
Empty the robot and re-inventory (using barcodes)vmupdate -rt tld -rn -rh -vh -nostderr -use_barcode_rules -use_seed -empty_ie
Tape Media Commands
List all poolsvmpool -listall -bx
List tapes in poolvmquery -pn -bx
List all tapes in the robotvmquery -rn 0 -bx |grep 'TLD' | sort +4
List cleaning tapesvmquery -mt dlt_clean -bx
List tape volume detailsvmquery -m
Delete a volume from the catalogvmdelete -m
Change a tapes expiry datevmchange -exp 12/31/06 23:59:58 -m
Change a tape's media poolvmchange -p -m
 Media commands

List the storage unitsbpstulist -U
Freeze or unfreeze mediabpmedia [-freeze][-unfreeze] -ev
List media detailsbpmedialist -ev
List media contentsbpmedialist -U mcontents -m
List backup Image Informationbpimagelist -backupid
Expire client imagesbpimage -cleanup -allclients
Expire a tapebpexpdate -d 0 -ev -force
List all netbackups jobsbpdbjobs -report [-hoursago]
Move media from one media server to anotherbpmedia -movedb -newserver -oldserver
Tape/Robot commands

List tape drivestpconfig -d
List cleaning times on drivestpclean -L
clean a drivetpclean -C
change a drives cleaning frequencytpclean -F
set a drives cleaning time to zerotpclean -M
Move tapes within robot using robtest
robtest
commands that can be used are as follows:

s s (show slots)
s d (show drives)
s i (show load port)
m s250 d5 (move tape from slot 250 into drive 5)
uload d5 (unload tape from drive 5)
m d5 s250 (move tape from drive 5 to slot 250)
m s250 i1 (mov tape from slot 250 to load port 1)

List load port tapesecho "s i q" | tldtest -r /dev/sg/c0t4l0
List all slot contentsecho "s s q" | tldtest -r /dev/sg/c0t4l0
List tape drive contentsecho "s d q" | tldtest -r /dev/sg/c0t4l0
Move a tape in s100 to drive 1echo "m s100 d1" | tldtest -r /dev/sg/c0t4l0
Move a tape to load port 1echo "m s100 i1" | tldtest -r /dev/sg/c0t4l0
Archiving Commands

list archive info
bpcatlist -client all -before Jul 01 2006
bpcatlist -client all -before Aug 01 2006
archive and remove imagesbpcatlist -before Jul 01 2006 | bpcatarc | bpcatrm
restore archive files
bpcatlist -before Jul 01 2006 | bpcatres
Client commands

test client connectivity
bpclntcmd [-ip ]
bpclntcmd [-hn ]
bpclntcmd [-pn]
bpclntcmd [-sv]