Create a Subclient - CommVault Step by Step tutorial

Use this procedure to create a subclient named "Test_Subclient" to perform your first backup.  

Procedure

1. From the CommCell Browser, expand Client Computers > client> Agent.
2. Right-click the defaultBackupSet, point to All Tasks and then click New Subclient.
   The Create New Subclient dialog box appears.
3. The default subclient is automatically created when you install the software.
   The content of the default subclient includes all of the data in the computer.
   When you create a user-defined subclient, the contents of the user-defined subclient are automatically removed from the default subclient content.
   
4. On the General tab, in the Subclientname box, type a name for the subclient.
   Note: In this example, we will use Test_Subclient.
   
5. On the Content tab, click Browse.
   
6. Navigate through the list of folders to select the files and folders that you want to include in the backup.
   In this example, we will include the My Documents folder as the subclient content.
   Select My Documents and then click Add.
   Click Close to close the Browsing content for dialog box.
   
7. To create a storage policy, click the Storage Device tab and then click Create Storage Policy.
   
8. In the What will this storage policy be used for? dialog box, click Data Protection and Archiving and then click Next.
   
9. In the Enter the storage policy name dialog box, type the name of the Storage Policy in the Storage Policy Name box.
   In this example, we will use Test_Storage_Policy.
   Click Next.
   
10. In the Select a default library for this primary copy dialog box, select a disk or tape library from the list.
    Note: The disk or tape library was configured previously. See Commvault Software Quick Start Guide - Configure a Storage Device.
    Click Next.
    
11. In the Select a MediaAgent for this copy dialog box, select a MediaAgent from the list.
    Click Next.
    
12. In the Enter the streams and retention criteria for this policy dialog box, click Next.
    
13. Select the Software Encryption option to enable encryption on copies including the primary copy.
    Click Next.
    
14. In the Do you want to enable Deduplication for the primary copy dialog box, select Yes and click Next.
    
15. In the Specify the location to store the Deduplication Store dialog box, select a MediaAgent from the MediaAgent Name list.
    In the Location box, type the path name where the deduplication database must be located or click Browse button to select the folder.
    Click Next.
    
16. In the Review your selections dialog box, confirm the details and then click Finish.
    
17. In the Subclient Properties dialog box, click OK.
    
18. In the Backup Schedule dialog box, select Do Not Schedule and then click OK.
    
19. The new subclient appears under the defaultBackupSet in the CommCell Browser.
    

Hope this helps to create a subclient for a server backup in detailed, please visit other Commvault tutorial from the top menu bar,

Source: me

NetBackup status code: 54 - Error Code details and Solution (Recommended Actions to resolve)

NetBackup status code: 54

Message: timed out connecting to client

Explanation: The server did not complete the connection to the client. The accept system or winsock call timed out after 60 seconds.

Some third-party software packages (for example, a personal firewall product) can affect the TCP/IP stack in Windows. This action can cause a loss of connection between the NetBackup server and the bpcd process on the client. NetBackup tries to set SO_REUSEADDR (allow local address reuse) on the inbound socket connection so that the port can be handed off from bpinetd.exe (the NetBackup Client Service) to bpcd.exe. Some products may not allow this functionality due to the various methods that can be used to violate system security.

Recommended Action: Do the following, as appropriate:

• For a Macintosh or NetWare target client: Verify that the server does not try to connect when a backup or restore is already in progress on the client. These clients can handle only one NetBackup job at a time.

  On a Macintosh, check for activity by examining the NetBackupListen file in the following folder on the startup disk of the Macintosh client:

  :System Folder:Preferences:NetBackup:logs:inetd:log.mmddyy  

• Perform the following procedure:

  See "Resolving network communication problems" in the Troubleshooting Guide.

• On UNIX and Linux clients, verify that the /usr/openv/netbackup/bin/bpcd binary exists and that it is the correct size.

• Check the /etc/inetd.conf file to make sure the bpcd path is correct in the following entry:

  bpcd stream tcp nowait root /usr/openv/netbackup/bin/bpcd bpcd  

• On the systems that include the following, make sure that the client name is in the master's /etc/hosts file: NetBackup master, media, and clients (with NetBackup database extension products installed on one or more clients).

• Completely uninstall the third-party software package on the client that causes the failure. Or, contact the software manufacturer to investigate if other configuration options or workarounds are possible.

Netbackup (NBU) Important Error Codes with solution - NBU Status Codes

Following are the most required and must known NBU status code which need to know by every NetBackup administrator. 

1. Status code 2
Reason: None of the file backed up
Action taken: no files in target path

2. Status code 13
Reason: File read failed
Action taken: network connectivity

3. Status code 25
Reason: Cannot connect to socket
Action taken: bpcd daemon want to check .

4. Status code 50
Reason: Client process aborted
Action taken: restart the backup manually wants to check any errors

5. Status Code – 59
Reason: Access to the client was not allowed
Action Taken: want to check the bp.conf / master-client access connectivity

6. Status code 71
Reason: Backup taking path changed
Action taken: path should be correct

7. Status Code – 84
Reason: Reduce the backup failure due to I/O error.
Action Taken: Clean the media mounts and to change the tape
default parameters to reduce backup failures due to I/O.

8. Status code – 96
Reason: Backup failure due to unavailable at scratch pool
Action taken: Volume pool has been allocated to scratch pool

9. Status code – 129
Reason: Disk storage unit is full
Action taken: remove old images

10. Status code – 196
Reason: Client backup was not attempted becoz backup window
close/elapsed time.
Action taken: manually restart the backup, if exceeds changes
the timing frequency and backup window frequency.

11. Status code – 2001
Reason: Tape library down error/Robotic path changed
Action taken: Manually bring up the robot.

NetBackup 7.x Backup Process Flow: Step 1-17 process explained in detail

NetBackup 7.x Backup Process Flow

1. When a PolicyClient task has its timer expire (indicating that it is due to run) an internal job task is created within nbpem that sends a Job Start to nbjm for the job which is due. nbpem provides to nbjm the parameters indicated in the backup policy and schedule that is generating the job.


2. nbjm adds the job to its job list or queue. It then communicates with bpjobd to inform it of the job, at which time the job becomes visible in the Activity Monitor in the queued state until resources are allocated for it.

3. nbjm sends a resource allocation request to the Resource Broker, nbrb, indicating the resources which are required for the backup operation and any resource consumption constraints for the job, including max jobs per policy, max jobs per client, and max jobs this client. These resource consumption constraints were provided to nbjm by nbpem when the job was initiated.


4. nbrb requests resources from the EMM service, nbemm, including storage unit, storage unit group, media, and devices or drives.


5. When physical resources are available, nbemm will allocate them and respond to nbrb, which in turn responds to nbjm. With resources allocated for the job, nbjm will notify bpjobd and the job moves to the active state.


6. nbjm is responsible for creating the files in the Images database that will house the backup information, the Header file and the Files (.f) file. nbjm initiates this activity by communicating with bpdbm (via nbproxy).


7. nbjm uses bpcompatd to communicate via PBX to start bpbrm on the media server that will write the backup image. The media server is selected based upon the destination storage unit that is selected.

8. bpbrm on the media server starts bpbkar (the client's backup and archive process) on the client system. bpbrm also starts bptm on the media server.


9. bptm initiates a connection with nbjm in order to get media and drive information for the backup job, which nbjm returns through a separate connection it initiates.


10. bptm will then initiate the mount of the media (tape) specified on the drive specified, or the mount of the disk specified. It will also spawns a bptm child process to receive the image from the client. The details of the Media Manager daemons (ltid, txxd, txxcd, and avrd) involved in the mounting of the media on the drive are not shown in this illustration, to reduce the complexity of the illustration.


11. bpbkar sends information about the backup image to bpbrm which forwards it to bpdbm on the master server. This stream of metadata is sent throughout the backup and stored in the master server's Image database.


12. When mounting and positioning of the media in the drive, or of the disk to be used, have been accomplished, the client backup process, bpbkar, will begin sending backup data to the bptm child process on the media server system. The bptm child process receives the image and stores it block by block into a shared memory segment on the media server. The parent bptm process retrieves the image from shared memory and directs it block by block to the allocated storage media.

13. When the backup has been completed bptm will notify bpbrm, which in turn will notify the Job Manager nbjm that the job has finished bptm will also notify nbjm that it is done with the media.

14. While the client and media server processes invoked to perform the backup operation (bpbrm, bptm, and bpbkar) are terminated, nbjm will update the status for the job by communicating with bpjobd. The job will be changed to Completed status, and the ending status of the job will be recorded.

15. nbjm communicates with bpdbm (using nbproxy) to complete the writing and verification of the files for the backup image in the Images database.

16. With the backup job completed nbjm will de-allocate the resources used for the backup by communicating with nbrb.

17. nbjm will notify nbpem that the job has been completed The completion status will be included in this notification. The PolicyClient task that created the job is responsible for requesting a re-try operation for this job on failure, or for computing the new 'due time' for this job on success.

Available Backup Types in Netbackup (Types of Backup)

1. Full Backup
Is the starting point of all the backups, contains all the data in the folders and files that are selected to be backed up. 

Advantages: Restore is fast
Disadvantages: Backup is slow and consumes more space.

2. Differential Incremental
Takes the backup of the files changed since the latest backup.  Archive bit is reset. Backup is taken based on the time stamp.

Netbackup Important Error Codes & its Solutions

Based on my experience in the daily issues level I have shorted few must know backup failure issues status codes which I have mentioned here.

The following are the Veritas Netbackup important error codes and its solutions.

1. NBU Status code: 2
Reason: None of the file backed up

Error bpsched(pid=XXXXX) backup of client SQLHOST exited with status 2 (none of the requested files were backed up)

Action taken: no files in target path. 

Enable the dbclient logfile on the SQL server. 

Veritas NetBackup (tm) SQL Agent is notconfigured to use Windows NT Authentication. 

Incase of SQL agent issue: Configure VeritasNetBackup (tm) SQL Agent to use Windows NT Authentication.

2. NBU Status code 13
Reason: File read failed

Corresponding example from the UNIX /usr/openv/netbackup/logs/bpbrm/log.<date>file:

<16> bpbrm readline: socket read failed, An existing connection was forcibly closed by the remote host. (10054)

<2> inform_client_of_status: INF - Server status = 13

<2> put_long: (11) network write() error: An existing connection was forcibly closed by the remote host. ; socket = 496

<16> inform_client_of_status: could not send server status message

A Status 13 will occur due to network issues on the master or client.  This error indicates a read operation of a file or socket failed.  This can also occur for Flash Backup or Advanced Client backups.

Backups fail with Status Code 13 "file read failed", indicating that a read of a file or socket has failed.  Winsock errors 10054 and 10053 may also be seen in the bpbkar log on the client. 
Action taken: network connectivity, check the below basic troubleshooting steps.

• Ensure that the latest service packs for all products and components (SQL, Exchange, Notes, etc.) have been installed.
• Ensure that all the network settings throughout the environment (NICs, hubs, switches, routers, etc.) are set to full duplex, not half duplex
• Increase the timeout settings on the NIC, if available.
• Try a different NIC, if available.
• If NIC teaming is implemented, deactivate for testing purposes.

3. Status code 25
Reason: Cannot connect to socket

The master server is getting a status code 25 (cannot connect on socket) error when attempting to bring up the client host properties using the GUI or remote admin console. 

Action taken: bpcd daemon want to check.

When troubleshooting status 25 errors on a NetBackup client, verify that the client was working prior to the issue. If it had been working try to determine what changes may have been made to the client server's OS or the network links

If there is no major changes, do the following basic troubleshooting: 

1. To test the master/media server resolution of the client server hostname run the following command:
   
   • <install path>/netbackup/bin/bpclntcmd -hn <client hostname>
2. Since reverse lookups is part of the NBU server to client connections make sure the client can also be resolved by its IP address:
   • <install path>/netbackup/bin/bpclntcmd -ip <client IP address>
3. On the client test the resolution of the NBU servers by issuing the same commands. These commands should be run against the master and all of the media servers that may be trying to backup the client server:
   • <install path>/netbackup/bin/bpclntcmd -hn <NBU server hostname>
   • <install path>/netbackup/bin/bpclntcmd -ip <NBU server IP address>
4. Verify you are able to "ping" the client's IP address from the NBU server. If this fails consult with your Network Administrator and client server System Administrator to resolve the layer 3 or IP network connectivity.
5. Double check the server's NIC's IP address and netmask to ensure they are configured correctly.

4. Status code 50
Reason: Client process aborted

The NetBackup Policy Execution Manager (NBPEM) ran out of memory and crashed causing all active jobs to fail with Status Code 50 - client process aborted  
Action taken: restart the backup manually wants to check any errors

1. Recycling the NetBackup services will temporarily restore functionality to the master server until the NBPEM process reaches the imposed 4GB memory limit. 

2. The solution is to set to maxdsiz_64bit 8GB in bp.conf .

5. Status Code – 59
Reason: Access to the client was not allowed

Action Taken: want to check the bp.conf / master-client access connectivity

A status code of 59 commonly occurs when the client does not have the NetBackup master or media server properly defined in the / usr/openv/netbackup/bp.conf file. There are a number of well-documented and effective ways to troubleshoot this problem, (e.g., creating a bpcd log on the client and then re-attempting the backup) but the UNIX last command is a quick and simple way to clearly establish the cause of this problem. 

Steps to follow to fix the issue:

1. If this is not a name resolution problem, add a "SERVER = BUServer" entry to bp.conf on NBUClient 

OR 

2. If this is a name resolution problem, correct the name resolution configuration ( /etc/hosts file, DNS or NIS maps) on NBUClient so that the above scenario would show NBUServer being returned in the output of the last command 

 3. In addition If the NetBackup Client being backed up is virtual (vmware).  The policy must be set as "Vmware policy type" if NetBackup is accessing the vsphere server to backup the server.  The other option is the NetBackup client needs to be installed on the virtual server being backed up.

6. Status code 71
Reason: Backup taking path changed

A Status 71 error "none of the filesin the file list exist" occurs.  However, it is known for certain that thebackup selections specified in the policy exist on the clients inquestion. 

Action taken: path should be correct

Then proceed with the following: 

1. Expand Policies in the left pane 

2. Double click the name of the policy that has failed with Status 71 

3. In the Change Policy window, click the Files or Backup Selections tab (the tab name varies depending upon version) 

4. Highlight an entry in the file list and click Rename. Then highlight the entire entry with the mouse.  See if there is a space at the end of the listing.   shows a file list entry that has a trailing space. 

Remove the trailing space if one is present. Check all other file listentries as needed.  Click OK in the Change Policy window and run thebackup again 

7. Status Code – 84
Reason: Reduce the backup failure due to I/O error.

Backup jobs fail with a NetBackup Status Code 84 (media write error) and the system's device driver returns an I/O error while NetBackup is writing to removable media or a disk file.

Action Taken: Clean the media mounts and to change the tape
default parameters to reduce backup failures due to I/O.

Turn logging up to Verbose = 5 for the bptm process on the problematic media server.  Capture the problemat the higher logging level and examine the resulting log file inside the <install_path>\netbackup\logs\bptm log folder. 

Additionally,examine the Application Event Log for NetBackupErrors. 

Some of errors can be caused by a faulty SCSI card.  Replace thefaulty SCSI card. 

8. Status code – 96
Reason: Backup failure due to unavailable at scratch pool

Similar Error log: invalid volume pool (90)unable to allocate new media for backup, storage unit has none available (96)

Action taken: Volume pool has been allocated to scratch pool

When duplicating tapes, verify the destination volume pool name is not defined as the same volume pool name which is configured as the scratch volume pool. The -dp option for the bpduplicate command defines the destination volume pool name.

9. Status code – 129
Reason: Disk storage unit is full

Backups to disk storage units fail with a VERITAS NetBackup (tm) Status 129 because the storage unit is full.

Action taken: remove old images

There are several methods that can be used to reclaim disk space on a disk storage unit.  Options such as, but not limited to, expiring older images, using an alternate storage unit, changing the retention level used and adding more disk space to the disk storage unit. 

Expire older images from the disk storage unit to reclaim disk space on the file system. 

10. Status code – 196
Reason: Client backup was not attempted becoz backup window
close/elapsed time.

Action taken: manually restart the backup, if exceeds changes
the timing frequency and backup window frequency.

client backup was not attempted because backup window closed 

This inability to allocate drive can cause the backup window to be closed. This can lead to an EMM server going down and getting various EMM errors including: 

Unable to obtain the server list from the Enterprise Media Manager server. Database Server is down (93) 

Verify there are no ACTIVE jobs. Deactivate and cancel all jobs. 

Steps: 1. Stop all NetBackup services on the master server: 

Windows: <install path>\Netbackup\bin\bpdown -v -f 

UNIX: /usr/openv/netbackup/bin/goodies/netbackup stop 

2. Check for active processes using command - <install path>\netbackup\bin\bpps –a 

3. Clear / kill them if you find any 

4. Restart all NetBackup services on the master server: 

Windows: <install path>\netbackup\bin\bpup -v -f 

UNIX: /usr/openv/netbackup/bin/goodies/netbackup start 

5. To see allocations (likely due to the EMM connection error): 

<install path>\NetBackup\bin\admincmd\nbrbutil -dump 

6. To clear the allocations run the following: 

<install path>\NetBackup\bin\admincmd\nbrbutil -resetall 

7. Run a regular backup and confirm that it is writing to tape. 

8.  Reactivate the jobs that were previously deactivated and confirm that they also now are running. 

11. Status code – 2001
Reason: Tape library down error/Robotic path changed
Action taken: Manually bring up the robot.

Only command vmoprcmd without parameters tells the actual status of drives. Any attempt of bringing of downed drives up with vmoprcmd ended with message: The drive is not ready or inoperable.

The solution is to deleting of downed drives with tpconfig, then tpautoconf -a and restarting of NetBackup.

Configure Restoredev file - HP Data Protector (MicroFocus)

In some Scenarios restore files when you use with default backed up device if it has been changed after the backup, such cases you need to change or divert the recovery process with a new device.

ex: Oracle restore took wrong device, not that at backup time

In case such situations occur it is always worth considering the possibilities that might affect the device selection due to user activities.
Two different ways to affect restore device should be taken into account:

    a) restoredev file
    b) omnidbutil -changebdev
 

Storage Area Networks (SAN) Interview Questions and Answers - Top 76 Questions added

Below are some of the frequently asked Storage (SAN) basic interview question and answers. Check the Storage Area Networks (SAN) basic & advanced concepts page in this site to learn more SAN basics. 

These are the general SAN questions, these questions will be helpful for any Storage Vendor specific interviews.

Storage Area Networks (SAN) Basic concepts Interview Questions and Answers:

NetBackup Tutorial: Steps to verify device configuration using "robtest"

NetBackup Tutorial: Steps to verify device configuration using "robtest"

The process to absolutely verify that the drive path mapping is correct on all of the media servers is a bit time consuming, but will ensure that everything is correct. 

Step 1 
Please note that this test cannot be run while VERITAS NetBackup (tm) is attempting backups, restores, duplicates, or any other actions that involve the robot and drives. 

Step 2 
Acquire the output of " /usr/openv/volmgr/bin/tpconfig -d " from each of the media servers. This is the drive configuration within NetBackup for each server. 

VEEAM VMCE_V8 exam - VEEAM Certified Engineer (VMCE8) exam dumps with answers

Free Veeam VMCE_V8 VEEAM Certified Engineer (VMCE8) exam dumps & updated practice test questions to study and pass quickly and easily.

100% Free Real Veeam VMCE_V8 VEEAM Certified Engineer (VMCE8) practice test questions uploaded by real users who have passed their own exam and verified all the incorrect answers.

VMCE_V8 Veeam Certified Engineer v8 

1. It put me out from my hurdles and I got passed with outstanding marks 96%.
2. Never did I even dream that I would get these marks.
3. I used this vce file questions and I ran across a lot of the same questions on my exam.
4. There is no doubt that you have to practice a lot for exam but it is very difficult to get the material that would help you in doing so.
5. Everything seems to be so easy and understandable.
6. This following Q/A's provided me with excellent examination tools for my VMCE_V8 exam

Data Protector v9 - Exam HP0-A113: HP ATP | HP Certification

HP HP0-A113 Exam

Updated and Latest HP0-A113 - HP Data Protector 9.x Essentials Practice Exam Questions that help cover the Exam Objectives - Pass Guaranteed!

 

Nothing to pay here for download the below HP0-A113 exam data dump, just visit below links for all 72 exam questions and answers. 

HP HP0-A113 HP ATP - Data Protector v9 exam dumps & updated practice test questions to study and pass quickly and easily.100% Free Real HP HP0-A113 HP ATP - Data Protector v9 practice test questions uploaded by real users who have passed their own exam and verified all the incorrect answers.

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 72

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 72

 What is the maximum number of stores that can be managed by one Data Protector B2D device?

A. 2 

B. 10 

C. 1 

D. 50

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 71

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 71

Which method should you use to export a Data Protector client from the cell?

A. The internal database context of the Data Protector GUI

B. The omnidbutil command-line utility

C. The omnidownload command-line utility 

D. The Clients context of the Data Protector GUI

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 70

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 70

Which Data Protector configuration file manages the list of authorized Cell Managers that are allowed to access a Data Protector client system?

A. allow_hosts
B. cell_server
C. ornni _info
D. cell_info

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 69

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 69

On which type of system does the Data Protector Media Agent need to be installed?

A. The system that runs the Backup Session Manager 

B. The system that is able to access the configured backup device
C. The Data Protector Cell Manager system
D. The same system that runs the Data Protector Disk Agent

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 68

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 68

A user wants to change the default Data Protector parameters and needs the modification to apply cell-wide. Which file should the user change to achieve this goal?

A. omnirc

B. cell_info 

C. global

D. ormi info

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 67

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 67

Which logical device always performs an auto - initialization of new media before backup?

A. File Library
B. Standalone Device
C. Stacker
D. File Jukebox

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 66

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 66

What is the name of a backup drive in a Data Protector File Library?

A. stacker

B. player

C. writer

D. reader

 

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 65

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 65

How can you install a new Data Protector Cell Manager on Windows?

A. by a remote push installation only, using the Data Protector GUI

B. by installing the system from a created ISO Image

C. by a remote push installation and a local system installation  

D. by a local system Installation only

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 64

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 64

Which sessions are logged by the auditing functionality that is found in the internal database context?

A. All sessions
B. Restore sessions
C. Copy sessions
D. Backup sessions

HP0-A113 HP ATP - Data Protector v9 (Exam 1 Questions) - Question 63

HP HP0-A113 Exam

for more exam questions visit :  HP0-A113 HP ATP

QUESTION NO: 63

Which command is executed by the HP Data Protector software Debug Log Collector?

A. omnirsh

B. omnidbutil 

C. omnidlc
D. omnidownload